Equator™ 500 versatile gauge

Equator 500 Standard Height Equator 500 Extended Height

Number of views:

1000

Category

AMM

Quantity

-

+



1

product description

Equator 500 Standard Height Equator 500 Extended Height

Working volume (WV)	XY Z	Ø500 mm 250 mm
WV height from base (see note 1)	0 mm
Machine weight	74 kg
Dimensions (W×D×H)	1204 mm × 1139 mm × 1585 mm

Working volume (WV)	XY Z	Ø500 mm 250 mm
WV height from base (see note 1)	150 mm
Machine weight	75 kg
Dimensions (W×D×H)	1204 mm × 1139 mm × 1735 mm

Specification

Comparison uncertainty (see note 2)	±0.002 mm
Probe type – scanning	Renishaw 3-axis SP25 analogue scanning
Maximum scanning speed (SP25)	250 mm/s
Scanning rate (SP25)	1000 points/s
Maximum movement speed	750 mm/s
Scale resolution	0.0002 mm
Fixturing requirement (see note 2)	1 mm
Machine air supply requirement	No air required
Operating temperature	+5 °C to +50 °C
Storage temperature	−25 °C to +70 °C
Relative humidity operating range	Maximum 80% RH at 40 °C, non-condensing
Machine electrical supply requirements	100 Vac to 240 Vac ±10%, 50 Hz to 60 Hz
Maximum power consumption (see note 3)	190 W
Typical power consumption (see note 4)	100 W
Fixture plate	510 mm × 510 mm
Maximum workpiece weight	100 kg

Note 1 The position of the working volume in the Z direction depends on the length of the stylus. The dimensions shown above represent using a SP25 probe and SM25-2 module with a 75 mm × 8 mm stylus so that the working volume boundary starts at the fixture plate

Note 2   The process of measuring on an Equator gauging system involves defining a series of gauge points on the component surface. Periodic calibration of a master part on a CMM establishes datum values for each gauge point. The same gauge points on the same master part are measured on the Equator system,
– ‘mastering’ –, to establish a correlation with the certified CMM. Subsequently, a regular ‘re-mastering’ process is used to account for changing environmental conditions. Size and position measurements made immediately following re-mastering will have a comparison uncertainty of ±0.002 mm relative to the certified measurements of the master part. This specification applies where each part is fixtured to within 1 mm relative to the master part.
Note 3   Peak consumption at power-up.
Note 4   3-axis system typical consumption based on taking touch points under DCC control + peak consumption at power-up.

Renishaw plc
New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom

T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com

Equator 500 Extended Height – range of Z-axis with different modules and styli

SM25-2 SM25-3

50 mm to 105 mm stylus capability 120 mm to 200 mm stylus capability

Additional stylus range with SM25-2

Additional stylus range with SM25-3

Machine
Equator 500 Standard Height gauging machine   A-6078-0070 Equator 500 Extended Height gauging machine   A-6078-0085
Controller standard
Equator Controller and MODUS Operator   A-5696-0101 Equator Controller and MODUS Programmer   A-5696-0102
Probe kit
Equator SP25 probe kit with SM25-2   A-5504-0205 Equator SP25 probe kit with SM25-2U   A-5504-0295 Equator SP25 probe kit with SM25-3   A-5504-0605
Manual interface
EQ500 EQ-J MCUlite-2 Equator joystick   A-6078-0258 EQ500 EQ-EBI Button Interface and
EQ-S stop button   A-6088-0050
EQ500 EQ-S Equator stop button   A-6078-0259

Fixture plates
EQ-5F-M8 Fixture plate – 41 hole A-6078-0209 EQ-5F-S150 Fixture plate spacer kit (H+150) A-6078-0208

Warranty
Extended Warranty (Year 2 ownership) EW1 Extended Warranty (Year 3 ownership) EW2
Power cables
UK   A-5504-0261
Europe and Korea   A-5504-0262
US, Mexico, Taiwan, Canada, Japan   A-5504-0263
China   A-5504-0264
S. Africa and India   A-5504-0265
Switzerland   A-5504-0266
Denmark   A-5504-0267
Australia   A-5504-0268
Israel   A-5504-0269
Brazil

Cleaning kit A-5504-0270
Equator cleaning kit A-5504-9055

For worldwide contact details, visit www.renishaw.com/contact

RENISHAW HAS MADE CONSIDERABLE EFFORTS TO ENSURE THE CONTENT OF THIS DOCUMENT IS CORRECT AT THE DATE OF PUBLICATION BUT MAKES NO WARRANTIES OR REPRESENTATIONS REGARDING THE CONTENT. RENISHAW EXCLUDES LIABILITY, HOWSOEVER ARISING, FOR ANY INACCURACIES IN THIS DOCUMENT.
© 2018 Renishaw plc. All rights reserved. Issued 07.2018